Corner Kitchen 3566 × 1705 mm — EGGER U708 / U750, Black Pietra Grigio Worktop

This configuration is designed for the kitchen layout of apartments in the Bonava «Pīlādžu mājas» project (Tumes iela 25, 27, 27A, Ziepniekkalns, Riga).

The corner kitchen is delivered fully assembled. Light grey carcasses and EGGER fronts are combined with a dark stone-effect Black Pietra Grigio worktop. All hardware is by Blum, with soft-close on every door and drawer. Häfele worktop lighting with a sensor switch. The kitchen is fully planned for built-in appliances.

Dimensions

Parameter	Value
Length along wall A	3566 mm
Length along wall B	1705 mm
Total kitchen height	2355 mm
Base units with worktop	920 mm
Backsplash (open area)	600 mm
Wall units, carcass	835 mm
Wall unit fronts	855 mm, lowered by 20 mm
Base unit depth incl. front (wall A)	590 mm
Worktop depth (wall A)	600 mm
Worktop depth (wall B)	524 mm
Wall unit depth	370 mm

The wall unit fronts are lowered 20 mm below the carcass, creating a hidden finger-pull gap along the entire length. The fronts read as one continuous surface — no applied profiles or visible hardware on top.

Materials

Carcass: EGGER U708 ST9 Light Grey, 18 mm, 0.8 mm ABS edging
Fronts: EGGER U750 ST9 Taupe Grey, 18 mm, 0.8 mm ABS edging in matching colour
Worktop: EGGER F206 ST9 Black Pietra Grigio, 38 mm — dark stone décor with matt ST9 texture
45° mitred worktop corner joint — no connecting strip and no visible seam in the corner
Wall panel: EGGER F206 ST9 Black Pietra Grigio, 10 mm, 600 mm high — included, in the same décor as the worktop

Want a different colour? We’ll recalculate

The combination shown is the base option. You can change:

carcass décor
front décor
worktop décor and thickness

The construction, dimensions and all hardware stay the same — only the finish changes. The price is recalculated based on the chosen décors: part of the EGGER collection costs the same, part costs more than the base option. Tell us which décor you like and we’ll send you an exact price within 2 working days.

Hardware

Blum

Clip top Blumotion hinges with integrated soft-close
4 Tandembox Antaro L500 D pull-out drawers — high sides, for dishes and pots
1 Tandembox Antaro L500 M pull-out drawer — low sides, with cutlery insert
All drawers with Blumotion soft-close, 500 mm runners, 30 kg load capacity

Handles

Way, matt black, 400 mm long

Häfele LED

3000K LED worktop lighting in an aluminium profile
Sensor switch built into the profile

Suitable appliances

Appliance	Niche requirements
Built-in fridge	height up to 1896 mm
Dishwasher	width 600 mm
Built-in oven	width 600 mm
Fully integrated cooker hood	mounted in a laminated box, fully concealed
Hob	built into the worktop

Please check the dimensions of your appliances before ordering. If they differ, contact us and we will adapt the carcasses to your specific models.

Recommended appliances

The kitchen was designed around these models — niche and box sizes are calculated specifically for them:

Type	Model
Cooker hood	ELICA ENTER IX/A/52
Hob	ELECTROLUX KIV634I, induction, 58 cm, 4 zones
Oven	ELECTROLUX EOF4P56X
Dishwasher	ELECTROLUX EES48401L, 60 cm
Fridge	ELECTROLUX ENC8MC19S, 1894 mm niche

Appliances are not included in the kitchen price and are purchased separately. Other models can be installed too — contact us and we’ll check the dimensions and adapt the carcasses if needed.

What’s included

The kitchen fully assembled: carcasses, fronts, worktop, wall panel, all listed Blum hardware, Häfele LED lighting with sensor, cutlery insert, handles.

Not included

Appliances, sink, tap
Cut-outs for the sink and hob. We don’t make them at the factory — the fitter cuts them during installation to the actual dimensions of your appliances. This rules out sizing errors but requires a fitter on site.
Connection of appliances, water and electricity