Linear Kitchen 3517 mm — EGGER U708 / U707, Vinzenza Oak Worktop
This configuration is designed for the kitchen layout of apartments in the Bonava «Pīlādžu mājas» project (Tumes iela 25, 27, 27A, Ziepniekkalns, Riga).
The linear kitchen is delivered fully assembled. A two-tone combination: Light Grey U708 carcasses and Silk Grey U707 fronts, paired with a worktop and wall panel in Vinzenza Oak wood décor. Handleless fronts — opening via a black Gola profile. Blum hardware, Häfele lighting with a sensor switch. Fully planned for built-in appliances.
Dimensions
| Parameter |
Value |
| Wall length |
3517 mm |
| Total kitchen height |
2343 mm |
| Base units with worktop |
920 mm |
| Backsplash (open area) |
600 mm |
| Wall units, carcass |
823 mm |
| Wall unit fronts |
843 mm, lowered by 20 mm |
| Base unit and tall unit depth incl. front |
590 mm |
| Wall unit depth incl. front |
390 mm |
| Worktop depth |
600 mm, 10 mm overhang |
The wall unit fronts are lowered 20 mm below the carcass, creating a hidden finger-pull gap along the entire length. The fronts read as one continuous surface — no applied profiles or visible hardware on top.
Materials
- Carcass: EGGER U708 ST9 Light Grey, 18 mm, 0.8 mm ABS edging
- Fronts: EGGER U707 ST9 Silk Grey, 18 mm, 0.8 mm ABS edging in matching colour
- Worktop: EGGER H3157 ST12 Vinzenza Oak, 38 mm
- Wall panel: EGGER H3157 Vinzenza Oak, 10 mm, 600 mm high — included, in the same décor as the worktop
The worktop and wall panel share one wood décor, while the carcasses and fronts use two shades of grey. Warm wood in the work zone softens the grey and avoids the “office kitchen” look that an all-grey scheme often creates.
Want a different colour? We’ll recalculate
The combination shown is the base option. You can change:
- carcass décor
- front décor
- worktop décor and thickness
The construction, dimensions and all hardware stay the same — only the finish changes. The price is recalculated based on the chosen décors: part of the EGGER collection costs the same, part costs more than the base option. Tell us which décor you like and we’ll send you an exact price within 2 working days.
Hardware
Blum
- Clip top Blumotion hinges with integrated soft-close
- 3 Tandembox Antaro L500 D drawers — high sides ≈224 mm
- 1 Tandembox Antaro L500 C drawer — medium sides ≈192 mm
- 1 Tandembox Antaro L500 M drawer — internal, low sides ≈83 mm
- 1 Tandembox Antaro L450 D drawer — in the sink unit
- All drawers with Blumotion soft-close, 30 kg load capacity
- Cutlery insert in the internal M drawer
Handles
- Black Gola profile: L-shaped in the base units, U-shaped in the wall units, vertical on the fridge tall unit
- Fronts stay smooth — nothing to catch clothing on, easy to clean
Häfele
- 3000K LED worktop lighting in an aluminium profile
- Sensor switch built into the profile
Accessories
- Two-tier dish drainer GTV MIX KB600
- MOVIX PRO KB200 anthracite basket in the narrow 200 mm pull-out — for bottles, oils and spices
Suitable appliances
| Appliance |
Niche requirements |
| Built-in fridge |
height up to 1780 mm |
| Dishwasher |
width 450 mm |
| Built-in oven |
width 600 mm |
| Microwave |
niche height 380 mm |
| Fully integrated cooker hood |
mounted in a laminated box, fully concealed |
| Hob |
built into the worktop |
Please check the dimensions of your appliances before ordering. If they differ, contact us and we will adapt the carcasses to your specific models.
Recommended appliances
The kitchen was designed around these models — niche and box sizes are calculated specifically for them:
| Type |
Model |
| Cooker hood |
ELECTROLUX KFG726R |
| Hob |
ELECTROLUX KIV634I, induction, 58 cm, 4 zones |
| Oven |
ELECTROLUX LOE8F38Z |
| Microwave |
ELECTROLUX LMS2203EMK |
| Dishwasher |
ELECTROLUX EEM63310L, 44.6 cm |
| Fridge |
ELECTROLUX ENA7CD18S, 1780 mm niche |
Appliances are not included in the kitchen price and are purchased separately. Other models can be installed too — contact us and we’ll check the dimensions and adapt the carcasses if needed.
What’s included
The kitchen fully assembled: carcasses, fronts, worktop, wall panel, all listed Blum hardware, Häfele LED lighting with sensor, cutlery insert, handles.
Not included
- Appliances, sink, tap
- Cut-outs for the sink and hob. We don’t make them at the factory — the fitter cuts them during installation to the actual dimensions of your appliances. This rules out sizing errors but requires a fitter on site.
- Connection of appliances, water and electricity
Delivery and installation
Calculated separately. Available on request — contact us and we’ll quote the cost for your address.