Floor-to-Ceiling Kitchen ZN1.3018, 3018 mm

Floor-to-Ceiling Linear Kitchen 3018 mm — EGGER U702 ST9 Cashmere, F052 Calais Travertine Worktop

A linear kitchen delivered fully assembled, running all the way to the ceiling. Light Grey carcasses and Cashmere Grey fronts are paired with a Calais travertine-effect worktop. Handleless fronts — opening via a black Gola profile. Open shelves in the front décor bring the wall units to life. Blum hardware, Häfele lighting with a sensor switch.

The dimensions are based on the average kitchen areas of typical apartments — the configuration fits most layouts with a wall length of 3 metres or more.

Dimensions

Parameter	Value
Wall length	3018 mm
Total kitchen height	2635 mm
Base units with worktop	915 mm
Gap between base and wall units	600 mm
Wall units, carcass	1120 mm
Wall unit fronts	1138 mm, lowered by 18 mm
Base unit depth incl. front	590 mm
Wall unit depth incl. front	405 mm
Worktop depth	600 mm, 10 mm overhang

At 1120 mm, the wall units are a third taller than standard. The kitchen reaches the ceiling: there’s no dust-collecting ledge on top, and usable storage grows by roughly two extra shelves of dishes. Wall units are 405 mm deep instead of the usual 320–350 mm — large plates and tall cookware fit easily.

The wall unit fronts are lowered 18 mm below the carcass, creating a hidden opening line along the entire length. Together with the Gola profile on the base units, the kitchen has no protruding handles at all.

Materials

Carcass: EGGER U708 ST9 Light Grey, 18 mm, 0.8 mm ABS edging
Fronts: EGGER U702 ST9 Cashmere Grey, 18 mm, 0.8 mm ABS edging in matching colour
Open shelves: EGGER U702 ST9 Cashmere Grey, 18 mm — same décor as the fronts
Worktop: EGGER F052 ST75 Calais Travertine, 38 mm

U702 Cashmere Grey is a soft neutral grey with a matt Smoothtouch texture that feels pleasant to the touch. A calm tone without coldness: it doesn’t turn the kitchen into an office and pairs well with the light stone worktop and a wooden floor.

A wall panel is not included in this configuration. It can be ordered separately — 10 mm in the worktop décor or any other décor of your choice.

Want a different colour? We’ll recalculate

The combination shown is the base option. You can change:

carcass décor
front décor
worktop décor and thickness

The construction, dimensions and all hardware stay the same — only the finish changes. The price is recalculated based on the chosen décors: part of the EGGER collection costs the same, part costs more than the base option. Tell us which décor you like and we’ll send you an exact price within 2 working days.

Hardware

Blum

Clip top Blumotion hinges with integrated soft-close
2 Tandembox Antaro L500 D drawers — high sides ≈224 mm
1 Tandembox Antaro L500 M drawer — low sides ≈83 mm, with cutlery insert
All drawers with Blumotion soft-close, 30 kg load capacity

Handles

Black Gola profile: L-shaped in the base units, U-shaped in the wall units
Fronts stay smooth — nothing to catch clothing on, easy to clean

Häfele

3000K LED worktop lighting in an aluminium profile
Sensor switch built into the profile

Accessories

Two-tier dish drainer GTV MIX KB800
MOVIX PRO KB200 anthracite basket in the narrow 200 mm pull-out — for bottles, oils and spices

Suitable appliances

Appliance	Niche requirements
Built-in oven	width 600 mm
Fully integrated cooker hood	mounted in a laminated box, fully concealed
Hob	built into the worktop

600 mm dishwasher. The unit next to the sink is 600 mm wide and can be replaced with a dishwasher. The kitchen is delivered complete and this unit is included in the price: if you need a dishwasher, simply leave the unit out and put the machine in its place.

Fridge. This configuration has no built-in fridge — it is designed for a freestanding fridge placed outside the kitchen run.

Please check the dimensions of your appliances before ordering. If they differ, contact us and we will adapt the carcasses to your specific models.

What’s included

The kitchen fully assembled: carcasses, fronts, open shelves, worktop, Gola profiles, all listed Blum hardware, cutlery insert, Häfele LED lighting with sensor, GTV dish drainer, MOVIX PRO basket.

Not included

Appliances, sink, tap
Wall panel — available at extra cost
Cut-outs for the sink and hob. We don’t make them at the factory — the fitter cuts them during installation to the actual dimensions of your appliances. This rules out sizing errors but requires a fitter on site.
Connection of appliances, water and electricity